BUYERS’ GUIDE
55
VMB TP-20
Category Support
The TP-20 is a top-loading, telescopic lifter designed to lift a maximum weight of 100kg (220lb) to a maximum height of 3m (9.84ft). Compact yet durable, this lightweight lifter is very easy to transport. Manufactured in Valencia, Spain, it is comprised of three premium-grade aluminium masts finished in black, epoxy, powder-coated paint for greater resistance to the elements and is suitable for both indoor and outdoor use. It is operated by an AL-KO winch with automatic braking and guided through custom-made bearing pullies via a galvanised steel cable.
Key features Patented ALS (Auto Lock Security) system ensures maximum safety Three extendable legs with non-slip rubber feet enable the lift to be set up in different positions Small enough to fit in the boot of a car
SRS GROUP TRS-DV TOURING RIGGING SYSTEM
Category Systems
This touring rigging set-up is designed as a modular system that provides an affordable, plug-and-play solution. With the ability to control between eight to 128 channels of motors, the TRS-DV is equipped with a hoist controller for direct voltage systems, a wireless remote and a drawer, all housed in a robust touring rack. Multi-pin split boxes are integrated within the covers of the rigging system so they’re easily accessible and safely stored for transport. All TRS-DV devices can be upgraded later with a load cell readout, including the emergency stop function. Key features AHD-WDV: direct voltage motor controller with built-in wireless remote and charging station
Drawer for additional storage place WMC hand: wireless hand remote
PROLYTE HT TOWER
Category Truss
The HT Tower is an upgrade on the MPT Tower based on H30V truss sections, and employs a new type of sleeve block that fits the 40-square series truss on all four sides by means of bolted CCS6 couplers. In combination with an adapter plate, it is also possible to use the sleeve block with either H40R or H30V truss, to maintain full capacity of the truss. Compared to the current MPT sleeve block, the HT sleeve block is reduced in size and has the same measurements as the standard H40V box corner. Key features The HT sleeve module is a fully bolted structural element, making it much stronger and more precise than conventional welded versions Same size as the standard 40 series box corners Easy-to-use dead-hang system
Powered by FlippingBook